The product description information of manufacturers who develop pre-twisted power fittings and pre-twisted wires may not be detailed and comprehensive enough. If you need more detailed information about pre-twisted power fittings or request relevant information, please feel free to contact me at any time! Contact person: Zhu Yan Contact number:
:: Anti-vibration hammer installation: It is recommended that the first anti-vibration hammer is installed on the inner twisted wire, and the end of the twisted wire is within the distance from the center of the anti-vibration hammer. When the second and third anti-vibration hammers are installed outside the pre-twisted wire, they should be lined with protective strips. The construction should be carried out in strict accordance with the technical requirements of the construction supervision. When the number of anti-vibration hammers is more than two, the number of anti-vibration hammers between the two anti-vibration hammers should be The distance between is.
Anti-vibration hammers have different sizes. When installing, the large hammer head should face the side of the tower. :: >The main products are: power special optical cables
::
:: >matching hardware,
::
:: >optical cables and matching hardware series: various specifications Suspension fittings, tension fittings, tangent suspension fittings, downlink clamps for poles (towers), etc., pre-twisted power fittings series for overhead lines: used for various specifications of steel core aluminum stranded wires, aluminum stranded wires, insulated conductors and Pre-twisted tension fittings for steel strands, suspension fittings, various splicing strips, protective strips, repair strips, etc.
::
:: >Uses
:::
:: >Anti-vibration hammers are mainly used
::
:: >Optical cables,< br/> ::
:: >On optical cables and power overhead wires, eliminate or reduce the vibration of wires and optical cables under the action of laminar wind to prevent damage to clamping hardware and optical cables. Features
:::
:: >The anti-vibration hammer adopts Harlow-type structural design, with slots in the middle of the large and small hammer heads, and the connection between the steel strand and the hammer head is exposed, so that the fatigue damage of the steel strand can be observed , does not limit the swing of the hammer head, does not wear the steel strand, and can obtain several resonant frequencies, suitable for cable diameter
:: .
:: >～
::
:: >The optical cable
:: (
:: >The diameter of the optical cable that can be clamped including the protective strip
:: )
:: >. Composition
:::
:: >The steel strands connected to the hammer head are refined steel strands, and the protective wires are aluminum alloy wires. The streamlined shape can effectively control corona.
Pre-twisted wire anti-shock hammer