Optical cable hoop manufacturers use hoops for optical cables. The optical cable hoops are fixed on the cement pole and connected to suspension clamps or tension clamps. Pole fastening clamps are used to connect tension clamps, suspension clamps, residual cable racks and optical cable splice boxes to the tower. Its main technical parameters are the failure load () and the position of the optical cable hanging point. The main material of the power tower The size is configured in such a way that it can be used in one-to-one correspondence with the tensile cable clamps, suspension cable clamps, residual cable racks and optical cable splice boxes. The location of the optical cable hanging point should meet the safety distance provisions of relevant regulations. The installation of optical cables on live conductor lines is deemed to be work on live poles. Therefore, the minimum distance between the scope of activities of construction workers and the tools, materials and other things they carry should not be less than . Insulated tools, insulated safety belts, and insulated ropes must be used during construction, and full-time personnel must be assigned for supervision. The wind force should not be greater than Level 5 during construction. If the above conditions cannot be met, construction should be carried out under live operation or under power outage.
Baoding Henglida is a comprehensive enterprise integrating production, development, sales and services. Reliable quality is our guarantee and honest service is our responsibility. Service hotline:
Optical cable hoop manufacturer